Four Methods of Drying a Flooded Building Before Help Arrives
Put The Following Damage Tips In Action
When water infiltrates a building, it's critical to dry the property as quickly as possible. Water can do a lot of damage fast; the very structure of a building can be affected. Mold can also turn into a huge problem in a short time. Professionals should be called, but there are damage tips you can put into action to begin the process until they arrive.
1. Extracting the Water
First, the standing water will need to be extracted. Flood cleaning tips will usually recommend using a wet/dry vacuum to begin the process. Industrial pumps will be brought in by the restoration professionals to remove the remaining water.
2. Circulating the Air
Mold can begin to grow within 24 hours of water introduction. As long as the mold hasn't had time to begin growing, air circulation should begin as soon as possible. Open windows and doors if the outdoor humidity levels are lower outside than in. Fans can also be used. If it's been more than 24 hours, you should wait until help arrives; the slightest movement of air will blow mold spores throughout the area, and even into unaffected areas.
3. Heating the Area
Heaters work best when there are proper air circulation and ventilation. Warm air absorbs more moisture than cool air, so heaters evaporate the water more efficiently. Heaters with built-in fans are even more effective. Flood damage tips will often inform you that heat is typically the fastest way to dry an area. However, you should be cautious not to dry it so quickly that heat damage occurs.
4. Dehumidifying the Area
Dehumidifiers pull moisture from the air. Desiccant dehumidifiers are the most effective, as they also expel dry air. For best performance, the indoor temperature should be between 32 and 77 degrees with 40 to 90% relative humidity.
Be prepared for a building flood in Lowell MA, by remembering these water damage tips. It's helpful to plan which water cleanup experts to call well in advance of a disaster. Whether the flood is a result of a pipe burst or a storm, they'll return your building to its preloss condition as quickly as possible.